ホーム パワー・マネージメント マルチチャネル IC (PMIC)

TPS65811

アクティブ

統合型シングル・セル・リチウムイオン・バッテリとパワー・マネージメント IC (PMIC)

製品詳細

Regulated outputs (#) 11 Vin (min) (V) 4.3 Vin (max) (V) 16 Vout (min) (V) 0.6 Vout (max) (V) 4.46 Iout (max) (A) 0.75 Features Comm control, Power sequencing Step-up DC/DC converter 0 Step-down DC/DC converter 2 Step-down DC/DC controller 0 Step-up DC/DC controller 0 LDO 9 Rating Catalog Operating temperature range (°C) -40 to 125 Processor supplier NXP/Freescale Processor name i.MX21
Regulated outputs (#) 11 Vin (min) (V) 4.3 Vin (max) (V) 16 Vout (min) (V) 0.6 Vout (max) (V) 4.46 Iout (max) (A) 0.75 Features Comm control, Power sequencing Step-up DC/DC converter 0 Step-down DC/DC converter 2 Step-down DC/DC controller 0 Step-up DC/DC controller 0 LDO 9 Rating Catalog Operating temperature range (°C) -40 to 125 Processor supplier NXP/Freescale Processor name i.MX21
VQFN (RTQ) 56 64 mm² 8 x 8
  • Battery Charger
    • Complete Charge Management Solution for
      Single Li-Ion or Li-Pol Cell:
      • With Thermal Foldback, Dynamic Power
        Management, and Pack Temperature-
        Sensing
      • Supports Up to 1.5-A Maximum Charge
        Current
    • Programmable Charge Parameters for
      AC Adapter and USB Port Operation
  • Integrated Power Supplies
    • Total of 9 integrated LDOs:
      • 6 Adjustable-Output LDOs (1.25 V to 3.3 V)
      • 2 Fixed-Voltage LDOs (3.3 V)
      • 1 RTC Backup Supply With Low Leakage
        (1.5 V)
    • 2 0.6-V to 3.4-V Programmable DC–DC Buck
      Converters (600 mA for TPS65810, 750 mA for
      TPS65811)
      • With Enable, Standby Mode Operation, and
        Automatic Low-Power Mode Setting
  • Display Functions
    • 2 Open-Drain PWM Outputs With
      Programmable Frequency and Duty Cycle
      • Control of Keyboard Backlight, Vibrator, or
        Other External Peripheral Functions
    • RGB LED Driver With Programmable Flashing
      Period and Individual RGB Brightness Control
    • Constant-Current White LED Driver
      • With Programmable Current Level,
        Brightness Control, and Overvoltage
        Protection
      • Can Drive up to 6 LEDs in Series
        Configuration
  • System Management
    • Dual Input Power Path Function With Input
      Current-Limiting and OVP Protection
    • POR Function With Programmable Masking
      Monitors All Integrated Supplies Outputs
    • Software and Hardware Reset Functions
    • 8-Channel Integrated A/D Samples System
      Parameters
      • With Single Conversion, Peak Detection, or
        Averaging Operating Modes
  • Host Interface
    • Host Can Set System Parameters and Access
      System Status Using I2C Interface
    • Interrupt Function With Programmable
      Masking Signals System Status Modification to
      Host
    • 3 GPIO Ports, Programmable as Drivers,
      Integrated A/D Trigger or Buck Converters
      Standby Mode Control
  • Battery Charger
    • Complete Charge Management Solution for
      Single Li-Ion or Li-Pol Cell:
      • With Thermal Foldback, Dynamic Power
        Management, and Pack Temperature-
        Sensing
      • Supports Up to 1.5-A Maximum Charge
        Current
    • Programmable Charge Parameters for
      AC Adapter and USB Port Operation
  • Integrated Power Supplies
    • Total of 9 integrated LDOs:
      • 6 Adjustable-Output LDOs (1.25 V to 3.3 V)
      • 2 Fixed-Voltage LDOs (3.3 V)
      • 1 RTC Backup Supply With Low Leakage
        (1.5 V)
    • 2 0.6-V to 3.4-V Programmable DC–DC Buck
      Converters (600 mA for TPS65810, 750 mA for
      TPS65811)
      • With Enable, Standby Mode Operation, and
        Automatic Low-Power Mode Setting
  • Display Functions
    • 2 Open-Drain PWM Outputs With
      Programmable Frequency and Duty Cycle
      • Control of Keyboard Backlight, Vibrator, or
        Other External Peripheral Functions
    • RGB LED Driver With Programmable Flashing
      Period and Individual RGB Brightness Control
    • Constant-Current White LED Driver
      • With Programmable Current Level,
        Brightness Control, and Overvoltage
        Protection
      • Can Drive up to 6 LEDs in Series
        Configuration
  • System Management
    • Dual Input Power Path Function With Input
      Current-Limiting and OVP Protection
    • POR Function With Programmable Masking
      Monitors All Integrated Supplies Outputs
    • Software and Hardware Reset Functions
    • 8-Channel Integrated A/D Samples System
      Parameters
      • With Single Conversion, Peak Detection, or
        Averaging Operating Modes
  • Host Interface
    • Host Can Set System Parameters and Access
      System Status Using I2C Interface
    • Interrupt Function With Programmable
      Masking Signals System Status Modification to
      Host
    • 3 GPIO Ports, Programmable as Drivers,
      Integrated A/D Trigger or Buck Converters
      Standby Mode Control

The TPS65810 device provides an easy-to-use, fully-integrated solution for handheld devices, integrating charge management, multiple regulated power supplies, system management, and display functions in a small, thermally-enhanced 8-mm × 8-mm package. The high level of integration enables space savings of 70% of the typical board area when compared to equivalent discrete solutions, while implementing a high-performance and flexible solution that is portable across multiple platforms.

If required, an external host can control the TPS65810 device through I2C interface with access to all integrated systems. The I2C enables the setting of the output voltages, current thresholds, and operation modes. The internal registers have a complete set of status information, enabling easy diagnostics, and host-controlled handling of fault conditions. The TPS65810 device can operate in standalone mode, with no external host control, if the internal power-up defaults are compatible with the system requirements.

The TPS65810 device provides an easy-to-use, fully-integrated solution for handheld devices, integrating charge management, multiple regulated power supplies, system management, and display functions in a small, thermally-enhanced 8-mm × 8-mm package. The high level of integration enables space savings of 70% of the typical board area when compared to equivalent discrete solutions, while implementing a high-performance and flexible solution that is portable across multiple platforms.

If required, an external host can control the TPS65810 device through I2C interface with access to all integrated systems. The I2C enables the setting of the output voltages, current thresholds, and operation modes. The internal registers have a complete set of status information, enabling easy diagnostics, and host-controlled handling of fault conditions. The TPS65810 device can operate in standalone mode, with no external host control, if the internal power-up defaults are compatible with the system requirements.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
2 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TPS6581x Single-Cell Li-Ion Battery and Power Management IC データシート (Rev. C) PDF | HTML 2014年 9月 22日
アプリケーション・ノート Optimizing Resistor Dividers at a Comparator (Rev. B) PDF | HTML 2021年 4月 30日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

パッケージ ピン数 ダウンロード
VQFN (RTQ) 56 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ