ホーム パワー・マネージメント LED ドライバ 照明 LED ドライバ

TPS92660

アクティブ

TPS92660 I2C/EPROM 電流トリミング機能搭載、2 ストリング LED ドライバ

製品詳細

Input voltage type DC/DC Topology Buck Vin (min) (V) 10 Vin (max) (V) 80 Vout (max) (V) 78 Vout (min) (V) 0.2 Iout (max) (A) 5 Iq (typ) (mA) 2.2 Features Adjustable Switch Frequency, Enable/Shutdown Operating temperature range (°C) -40 to 125 Dimming method 2-Wire, Analog, PWM Number of channels 2 Rating Catalog
Input voltage type DC/DC Topology Buck Vin (min) (V) 10 Vin (max) (V) 80 Vout (max) (V) 78 Vout (min) (V) 0.2 Iout (max) (A) 5 Iq (typ) (mA) 2.2 Features Adjustable Switch Frequency, Enable/Shutdown Operating temperature range (°C) -40 to 125 Dimming method 2-Wire, Analog, PWM Number of channels 2 Rating Catalog
HTSSOP (PWP) 20 41.6 mm² 6.5 x 6.4
  • Input Voltage: Up to 80 V
  • Two-Output LED Current Controller
  • LED Currents Trimmed Through One-Time Programmable (OTP) ROM with I2C Interface
  • Adjustable SADJ and LADJ Pins for PWM Dimming of Each LED String
  • Input Undervoltage Lockout and Output Overvoltage Protection
  • Enable On/Off
  • Accurate 3.0-V Reference Voltage
  • > 95% Efficiency
  • Thermal Shutdown Protection
  • 20-pin TSSOP Exposed Pad Package
  • Input Voltage: Up to 80 V
  • Two-Output LED Current Controller
  • LED Currents Trimmed Through One-Time Programmable (OTP) ROM with I2C Interface
  • Adjustable SADJ and LADJ Pins for PWM Dimming of Each LED String
  • Input Undervoltage Lockout and Output Overvoltage Protection
  • Enable On/Off
  • Accurate 3.0-V Reference Voltage
  • > 95% Efficiency
  • Thermal Shutdown Protection
  • 20-pin TSSOP Exposed Pad Package

The TPS92660 is a two-output LED driver with one time programmable (OTP) ROM and I2C interface for LED current trim. The current trim provides a way for LED fixture manufacturers to produce LED lighting fixtures at a consistent lumen output without binning LEDs.

One output of the device is a non-synchronous buck controller which is used to regulate current of higher power white LEDs. The other output of the device is a linear regulator controller which is used to regulate current of lower power red LEDs. The TPS92660 is used for applications of controlled CCT (correlated color temperature) LED lights by mixing white LEDs with red LEDs.

This device is available in a 20-pin, TSSOP exposed pad package.

The TPS92660 is a two-output LED driver with one time programmable (OTP) ROM and I2C interface for LED current trim. The current trim provides a way for LED fixture manufacturers to produce LED lighting fixtures at a consistent lumen output without binning LEDs.

One output of the device is a non-synchronous buck controller which is used to regulate current of higher power white LEDs. The other output of the device is a linear regulator controller which is used to regulate current of lower power red LEDs. The TPS92660 is used for applications of controlled CCT (correlated color temperature) LED lights by mixing white LEDs with red LEDs.

This device is available in a 20-pin, TSSOP exposed pad package.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
4 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート Two-String LED Driver with I2C/EPROM Current Trim データシート 2013年 4月 2日
ホワイト・ペーパー Common LED Functions and LED Driver Design Considerations.. 英語版 2020年 9月 21日
セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
EVM ユーザー ガイド (英語) Using the TPS92660EVM 2012年 11月 15日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TPS92660EVM — TPS92660EVM 2 ストリング LED ドライバ評価基板、I2C/EPROM 電流トリム付

Two String LED Driver with I2C/EPROM Current Trim Evaluation Module Board

The EVM consists of one non-synchronous constant current buck converter with input voltage up to 80VDC and one constant current linear regulator with input voltage up to 60VDC. LED currents can be trimmed by the I2C (...)

ユーザー ガイド: PDF
計算ツール

SLVC493 TPS92660 Design Tool

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
照明 LED ドライバ
TPS92660 TPS92660 I2C/EPROM 電流トリミング機能搭載、2 ストリング LED ドライバ
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ ピン数 ダウンロード
HTSSOP (PWP) 20 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ