PCMD3180
- 8-channel PDM microphones simultaneous conversion
- PDM input to TDM or I2S output converter performance:
- 127-dB dynamic range (DR) with high performance 5th order PDM input
- 117-dB dynamic range (DR) with high performance 4th order PDM input
- Channel summing mode, DR performance with high performance 4th order PDM input:
- 120-dB, 2-channel summing
- 123-dB, 4-channel summing
- Programmable PDM clock output :
- 768 kHz to 6.144 MHz
- Programmable output sample rate (fS) :
- 8 kHz to 768 kHz
- Programmable channel settings:
- Digital volume control: –100 dB to 27 dB
- Gain calibration with 0.1-dB resolution
- Phase calibration with 163-ns resolution
- Microphone bias or supply voltage generation
- Low-latency signal processing filter selection
- Programmable HPF and biquad digital filters
- I2C or SPI controls
- Integrated high-performance audio PLL
- Automatic clock divider setting configurations
- Audio serial data interface:
- Format: TDM, I2S, or left-justified (LJ)
- Word length: 16 bits, 20 bits, 24 bits, or 32 bits
- Master or slave interface
- Single-supply operation: 3.3 V or 1.8 V
- I/O-supply operation: 3.3 V or 1.8 V
- Power consumption for 1.8-V supply:
- 2.9 mW/channel at 16-kHz sample rate
- 2.5 mW/channel at 48-kHz sample rate
The PCMD3180 is a high-performance, pulse-density-modulation (PDM) input to time-division multiplexing (TDM) or I2S output converter that supports simultaneous sampling of up to eight digital channels for the PDM microphone input. The device integrates programable digital volume control, a microphone bias voltage, a phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, low-latency filter modes, and allows for output sample rates up to 768 kHz. The device supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with either the I2C or SPI interface. Additionally, the PCMD3180 supports master and slave mode selection for the audio bus interface operation. These integrated high-performance features, along with the ability to be powered from a single-supply of 3.3 V or 1.8 V, make the device an excellent choice for space-constrained audio systems in far-field microphone recording applications.
The PCMD3180 is specified from –40°C to +125°C, and is offered in a 24-pin WQFN package.
詳細リクエスト
PurePath™ Console 3、PCMD3180 GUI、およびその他の設計リソースが入手可能です。ご請求
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | PCMD3180 Octal-Channel, PDM Input to TDM or I2S Output Converter データシート | PDF | HTML | 2019年 8月 14日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
ADC3140EVM-PDK — TLV320ADC3140 クワッドチャネル、768kHz、Burr-Brown™ オーディオ ADC の評価モジュール
The ADC3140EVM-PDK is an evaluation module (EVM) that allows the user to test the capabilities of the TLV320ADC3140 device, which is a quad-channel, high-performance audio analog-to-digital converter (ADC). TLV320ADC3140 is intended for voice-activated systems, professional (...)
PCMD31XX-DRIVERS — PCMD31xx ADC ファミリ向けの Linux ドライバ・サポート
Linux のメインライン・ステータス
Linux メインラインで利用可能か:はい
git.ti.com から入手可能か:N/A
その他のファイル:
(...)
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ | ピン数 | ダウンロード |
---|---|---|
WQFN (RTW) | 24 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。