TAS5706
20W ステレオ、クローズド・ループ、I2S オーディオ・パワー・アンプ、スピーカ EQ および DRC 付
製品の詳細
パラメータ
詳細を表示できません。製品の データシートを参照してください。特長
- Audio Input/Output
- 20-W into an 8-Ω Load From an 18-V Supply
- Two Serial Audio Inputs (Four Audio Channels)
- Supports Multiple Output Configurations:
- 2-Ch Bridged Outputs (20 W × 2)
- 4-Ch Single-Ended Outputs (10 W × 4)
- 2-Ch Single-Ended + 1-Ch Bridged (2.1) (10 W × 2 + 20 W)
- Closed Loop Power Stage Architecture
- Improved PSRR Reduces Power Supply Performance Requirements
- Higher Damping Factor Provides for Tighter, More Accurate Sound
With Improved Bass Response - Constant Output Power Over Variation in Supply
- Wide PVCC Range From (10 V to 26 V)
- No Separate Supply Required for Gate Drive
- Supports 32-kHz–192-kHz Sample Rates (LJ/RJ/I2S)
- Headphone PWM Outputs
- Subwoofer PWM Outputs
- AM Interference Avoidance Support
- Audio/PWM Processing
- Independent Channel Volume Controls With 24-dB to
–100-dB Range—Soft Mute (50% Duty Cycle) - Programmable Dynamic Range Control
- 16 Programmable Biquads for Speaker Equalization
- Adaptive Biquad Coefficients for EQ and DRC Filters
- Programmable Input and Output Mixers
- Loudness Compensation for Subwoofer
- Automatic Sample-Rate Detection and Coefficient Banking
- Independent Channel Volume Controls With 24-dB to
- General Features
- Serial Control Interface Operational Without MCLK
- Factory-Trimmed Internal Oscillator Avoids the Need for External Crystal
- Surface Mount, 64-Terminal, 10-mm × 10-mm HTQFP Package
- Thermal and Short-Circuit Protection
All other trademarks are the property of their respective owners
概要
The TAS5706 is a 20-W, efficient, digital audio power amplifier for driving stereo bridged-tied speakers. Two serial data inputs allow processing of up to four discrete audio channels and seamless integration to most digital audio processors and MPEG decoders, accepting a wide range of input data and clock rates. A fully programmable data path allows these channels to be routed to the internal speaker drivers or output via the subwoofer or headphone PWM outputs.
The TAS5706 is a slave-only device receiving all clocks from external sources. The TAS5706 operates at a 384-kHz switching rate for 32-, 48-, 96-, and 192-kHz data, and at a 352.8 kHz switching rate for 44.1-, 88.2-, and 176.4-kHz data. The 8× oversampling combined with the fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.
技術資料
種類 | タイトル | 英語版のダウンロード | 日付 | |
---|---|---|---|---|
* | データシート | 20W-Stereo Digital Audio Power Amplifier With EQ and DRC データシート | 2010年 12月 6日 |
設計と開発
追加の事項や他のリソースを参照するには、以下のタイトルをクリックすると、詳細ページを表示できます。設計ツールとシミュレーション
設計とシミュレーション向けの環境である PSpice for TI を使用すると、内蔵のライブラリを活用して、複雑なミックスド・シグナル設計のシミュレーションを実施することができます。完成度の高い最終機器を設計し、レイアウトの確定や製造開始より前に、ソリューションのプロトタイプを製作することができます。この結果、市場投入期間の短縮と開発コストの削減を実現できます。
設計とシミュレーション向けのツールである PSpice for TI の環境内で、各種 TI デバイスの検索、製品ラインアップの参照、テスト・ベンチの起動、設計のシミュレーションを実施し、選定したデバイスをさらに分析することができます。また、複数の TI デバイスを組み合わせてシミュレーションを実行することもできます。
事前ロード済みの複数のモデルで構成されたライブラリ全体に加えて、PSpice for TI ツール内で各種 TI デバイスの最新の技術関連資料に簡単にアクセスすることもできます。開発中のアプリケーションに適したデバイスを選定できたことを確認した後、TI 製品の購入ページにアクセスして、その製品を購入することができます。
PSpice for TI を使用すると、回路の検討から設計の開発や検証まで、作業の進展に合わせて設計サイクルの各段階で、シミュレーションのニーズに適した各種ツールにアクセスできます。コスト不要で入手でき、開発を容易に開始できます。設計とシミュレーションに適した PSpice スイートをダウンロードして、今すぐ設計を開始してください。
開発の開始
- PSpice for TI シミュレータへのアクセスの申請
- ダウンロードとインストール
- シミュレーション方法説明ビデオのご視聴
特長
- Cadence の PSpice テクノロジーを活用
- デジタル・モデル・スイートが付属する事前インストール済みのライブラリを活用して、ワーストケース・タイミング分析を実現可能
- 動的更新により、最新のデバイス・モデルに確実にアクセス可能
- 精度の低下を招かずに、シミュレーション速度を重視して最適化済み
- 複数製品の同時分析をサポート
- OrCAD Capture フレームワークを土台とし、業界で最も幅広く使用されている回路図のキャプチャとシミュレーションの環境へのアクセスを実現
- オフライン作業が可能
- 以下の点を含め、多様な動作条件とデバイス公差にまたがって設計を検証
- 自動的な測定と後処理
- モンテカルロ分析法
- ワーストケース分析
- 熱解析
CAD/CAE シンボル
パッケージ | ピン数 | ダウンロード |
---|---|---|
HTQFP (PAP) | 64 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL rating/ リフローピーク温度
- MTBF/FIT の推定値
- 原材料組成
- 認定試験結果
- 継続的な信頼性モニタ試験結果