TPS65145
フル統合型の正のチャージ・ポンプと 3.3V LDO コントローラと最小 0.96A の昇圧電流制限機能と障害検出機能搭載、4 チャネル LCD バイアス
TPS65145
- 2.7-V to 5.8-V Input Voltage Range
- 1.6-MHz Fixed Switching Frequency
- 3 Independent Adjustable Outputs
- Main Output up to 15 V With <1% Typical Output
Voltage Accuracy - Virtual Synchronous Converter Technology
- Negative Regulated Charge Pump Driver VO2
- Positive Charge Pump Converter VO3
- Auxiliary 3.3-V Linear Regulator Controller
- Internal Soft Start
- Internal Power-On Sequencing
- Fault Detection of All Outputs (TPS65140 and
TPS65145) - No Fault Detection (TPS65141)
- Thermal Shutdown
- System Power Good
- Available in 24-Pin HTSSOP and 24-Pin VQFN
PowerPAD™ Packages
The TPS6514x series offers a compact and small power supply solution to provide all three voltages required by thin film transistor (TFT) LCD displays. The auxiliary linear regulator controller can be used to generate a 3.3-V logic power rail for systems powered by a 5-V supply rail only.
The main output VO1 is a 1.6-MHz fixed frequency PWM boost converter providing the source drive voltage for the LCD display. The device is available in two versions with different internal switch current limits to allow the use of a smaller external inductor when lower output power is required. The TPS65140 and TPS65141 has a typical switch current limit of 2.3 A and the TPS65145 has a typical switch current limit of 1.37 A. A fully integrated adjustable charge pump doubler or tripler provides the positive LCD gate drive voltage. An externally adjustable negative charge pump provides the negative gate drive voltage. Due to the high 1.6-MHz switching frequency of the charge pumps, inexpensive and small 220-nF capacitors can be used.
Additionally, the TPS6514x series has a system power good output to indicate when all supply rails are acceptable. For LCD panels powered by 5 V the device has a linear regulator controller using an external transistor to provide a regulated 3.3-V output for the digital circuits. For maximum safety, the TPS65140 and TPS65145 goes into shutdown as soon as one of the outputs is out of regulation. The device can be enabled again by toggling the input or the enable (EN) pin to GND. The TPS65141 does not enter shutdown when one of its outputs is below its power good threshold.
お客様が関心を持ちそうな類似品
比較対象デバイスと類似の機能
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | TPS6514x Triple Output LCD Supply With Linear Regulator and Power Good データシート (Rev. F) | PDF | HTML | 2016年 6月 29日 | ||
アプリケーション・ノート | 昇圧コンバータの電力段に関する基本的な計算 (Rev. D 翻訳版) | PDF | HTML | 英語版 (Rev.D) | PDF | HTML | 2022年 12月 1日 | |
アプリケーション・ノート | Basic Calculation of a Boost Converter's Power Stage... (Rev. D) | PDF | HTML | 2022年 11月 21日 | |||
アプリケーション・ノート | Understanding Undervoltage Lockout in Power Devices (Rev. A) | 2018年 9月 19日 | ||||
セレクション・ガイド | 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) | 英語版 (Rev.R) | 2018年 9月 13日 | |||
アプリケーション・ノート | Basic calculation of an inverting buck-boost power stage (Rev. A) | 2017年 8月 28日 | ||||
アプリケーション・ノート | How to Estimate the Output Voltage Range of the Charge Pumps in the TPS6510x | 2017年 8月 8日 | ||||
アプリケーション・ノート | How to Compensate the TPS6510x and the TPS6514x | 2016年 8月 30日 | ||||
アプリケーション・ノート | Generation of a VCOM buffer input using PWM signal | 2015年 12月 21日 | ||||
アプリケーション・ノート | Minimizing Ringing at the Switch Node of a Boost Converter | 2006年 9月 15日 | ||||
アプリケーション・ノート | Customizing your TPS6510x/TPS6514X | 2004年 6月 22日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
DLPLCR4500EVM — DLP® LightCrafter™ 4500
DLP® LightCrafter™ 4500 開発モジュールは産業、医療、科学アプリケーション向けに、高い輝度と解像度を備えたフレキシブルな高精度ライト・ステアリング・ソリューションを実現します。DLP LightCrafter 4500 は 0.45 インチ WXGA チップセットを採用しており、高い解像度、輝度、プログラマビリティを小フォーム・ファクタで提供します。
DLP LightCrafter 4500 の USB ベース API(アプリケーション・プログラミング・インターフェイス)と使いやすい (...)
DLPNIRSCANEVM — DLP® NIRscan™ 評価モジュール
DLP NIRscan は、高性能で手頃な近赤外線分光計を設計するための評価モジュール(EVM)です。設計者が DLP ベースの分光器の開発をすぐに開始するために必要なものがすべて含まれています。この評価モジュールは、近赤外(NIR)光用に最適化されている初の DLP チップセットとなる DLP 0.45 WXGA NIR チップセットが特長です。DLP テクノロジーにより、食品、製薬、石油/ガス、他の新興産業で使用されている分光器で、ラボ・レベルの性能を工場や現場でも実現できるようになります。
TPS65100EVM-030 — TPS65100 の評価基板
TPS65140EVM-031 — TPS65140 評価モジュール
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
TIDA-01474 — 1080p レーザー TV のリファレンス・デザイン
TIDA-00570 — 高速 DLP サブシステム、工業用 3D 印刷、および、デジタル・リソグラフィ用、リファレンス・デザイン
TIDA-00155 — DLP® 近赤外分光計、液体と固体の光学的分析用
DLP4500-C350REF — DLP 0.45 WXGA チップセット・リファレンス・デザイン
TIDA-00254 — DLP®テクノロジーを使用する3Dマシン・ビジョン・アプリケーション用の高精度ポイント・クラウド・ジェネレーション
TIDA-00782 — DLP® テクノロジーを使用する、ポータブル、高輝度 HD プロジェクション・ディスプレイ、リファレンス・デザイン
パッケージ | ピン数 | ダウンロード |
---|---|---|
HTSSOP (PWP) | 24 | オプションの表示 |
VQFN (RGE) | 24 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。