ホーム パワー・マネージメント AC/DC & DC/DC controllers (external FET)

LM27213

アクティブ

5V ~ 30V、ヒステリシス同期整流降圧コントローラ

製品詳細

Vin (min) (V) 5 Vin (max) (V) 30 Iout (max) (A) 25 Operating temperature range (°C) -5 to 110 Rating Catalog Vout (min) (V) 0.7 Vout (max) (V) 1.708 Iq (typ) (A) 0.003 Duty cycle (max) (%) 85
Vin (min) (V) 5 Vin (max) (V) 30 Iout (max) (A) 25 Operating temperature range (°C) -5 to 110 Rating Catalog Vout (min) (V) 0.7 Vout (max) (V) 1.708 Iq (typ) (A) 0.003 Duty cycle (max) (%) 85
TSSOP (DGG) 48 101.25 mm² 12.5 x 8.1 WQFN (RHS) 48 49 mm² 7 x 7
  • Ideal Load and Line Transient Responses
  • 5V to 30V Input Range
  • On-Chip Gate Drive
  • Convenient CLK_EN# Signal
  • Input Under-Voltage Lockout
  • High Light-Load Efficiency
  • Adjustable Analog Soft Start
  • Peak Current Limit
  • Over-Voltage Protection
  • Error Correction for Good Static Accuracy
  • ±1% DAC Accuracy Over Temperature
  • Interfaces with the LM2647 System Supply
  • Available in TSSOP or WQFN Packages

All trademarks are the property of their respective owners.

  • Ideal Load and Line Transient Responses
  • 5V to 30V Input Range
  • On-Chip Gate Drive
  • Convenient CLK_EN# Signal
  • Input Under-Voltage Lockout
  • High Light-Load Efficiency
  • Adjustable Analog Soft Start
  • Peak Current Limit
  • Over-Voltage Protection
  • Error Correction for Good Static Accuracy
  • ±1% DAC Accuracy Over Temperature
  • Interfaces with the LM2647 System Supply
  • Available in TSSOP or WQFN Packages

All trademarks are the property of their respective owners.

The LM27213 is a single-phase synchronous buck regulator controller designed to fully support a portable microprocessor. On-chip gate drive makes for a compact, single chip solution. Output currents in excess of 25 Amps are possible.

The IC employs a current mode hysteretic control mechanism. Inductor current is sensed through a low value sense resistor.

The LM27213 will operate over an input voltage range of 5V to 30V. The output voltage is programmed through 6 Voltage Identification (VID) pins and ranges from 0.700V to 1.708V in 64 steps.

Since the error in the output voltage directly sets the inductor current, the dynamic response to a large, fast load transient is close to a square wave. This is optimal for mode transition requirements. Also, due to the intrinsic input voltage feedforward characteristic of hysteretic control, the line transient response is excellent as well.

The IC provides cycle-by-cycle peak current limit, over-voltage protection, and a power good signal. The LM27213 fully supports the Stop CPU and Sleep modes offered by some processors. When enabled, the IC enters a power-saving “diode emulator” mode which helps prolong battery runtime for portable systems.

The LM27213 also has a soft start feature for the external adjustment of soft start speed.

The LM27213 is a single-phase synchronous buck regulator controller designed to fully support a portable microprocessor. On-chip gate drive makes for a compact, single chip solution. Output currents in excess of 25 Amps are possible.

The IC employs a current mode hysteretic control mechanism. Inductor current is sensed through a low value sense resistor.

The LM27213 will operate over an input voltage range of 5V to 30V. The output voltage is programmed through 6 Voltage Identification (VID) pins and ranges from 0.700V to 1.708V in 64 steps.

Since the error in the output voltage directly sets the inductor current, the dynamic response to a large, fast load transient is close to a square wave. This is optimal for mode transition requirements. Also, due to the intrinsic input voltage feedforward characteristic of hysteretic control, the line transient response is excellent as well.

The IC provides cycle-by-cycle peak current limit, over-voltage protection, and a power good signal. The LM27213 fully supports the Stop CPU and Sleep modes offered by some processors. When enabled, the IC enters a power-saving “diode emulator” mode which helps prolong battery runtime for portable systems.

The LM27213 also has a soft start feature for the external adjustment of soft start speed.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
3 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM27213 Single Phase Hysteretic Buck Controller データシート (Rev. A) 2013年 3月 28日
アプリケーション・ノート AN-1487 Current Mode Hysteretic Buck Regulators (Rev. B) 2013年 5月 5日
アプリケーション・ノート Application Note 1487 Current Mode Hysteretic Buck Regulators (jp) 2006年 8月 29日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

パッケージ ピン数 ダウンロード
TSSOP (DGG) 48 オプションの表示
WQFN (RHS) 48 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ