TPS23785B
- Powers up to 30-W (Input) PDs
- DC-to-DC Control Optimized for Non-Isolated Converters
- Supports High-Efficiency Topologies
- Complete PoE Interface
- Enhanced Classification per IEEE 802.3at with Status Flag
- Adapter ORing Support
- Robust 100-V, 0.5-Ω Hotswap MOSFET
- –40°C to 125°C Junction Temperature Range
- Industry Standard PowerPAD TSSOP-24
The TPS23785B is a combined Power over Ethernet (PoE) powered device (PD) interface and current-mode DC-to-DC controller optimized specifically for non-isolated converters. The PoE interface supports the IEEE 802.3at standard.
The TPS23785B supports a number of input voltage ORing options including highest voltage, external adapter preference, and PoE preference. These features allow the designer to determine which power source will carry the load under all conditions.
The PoE interface features the two-event, physical-layer classification necessary for compatibility with high-power midspan power sourcing equipment (PSE) per IEEE 802.3at. The detection signature pin can also be used to force power from the PoE source off. Classification can be programmed to any of the defined types with a single resistor.
The DC-to-DC controller features two complementary gate drivers with programmable dead time. This simplifies design for highly-efficient flyback topologies utilizing secondary synchronous rectification. The second gate driver may be disabled if desired for single MOSFET topologies. The controller also features internal softstart, bootstrap startup source, current-mode compensation, and a 78% maximum duty cycle. A programmable and synchronizable oscillator allows design optimization for efficiency and eases use of the controller to upgrade existing power supply designs. Accurate programmable blanking, with a default period, simplifies the usual current-sense filter design trade-offs.
注
アクティブ – TI の限定的な設計サポート
この製品に関し、既存のプロジェクトで、TI による限定的な直接の設計サポートが利用可能です。該当する場合は、関連する資料とソフトウェアはプロダクト フォルダに掲載されています。この製品を使用している既存の設計の場合、TI E2E サポート フォーラムでサポートをリクエストすることもできますが、この製品で利用できるのは限定的なサポートです。
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | High-Power, High-Efficiency PoE PD and DC-to-DC Controller データシート (Rev. A) | 2012年 12月 18日 | |||
アプリケーション・ノート | Lightning Surge Considerations for PoE Powered Devices | 2015年 4月 30日 | ||||
ユーザー・ガイド | TPS23785BEVM-522 Evaluation Module | 2014年 4月 25日 | ||||
アプリケーション・ノート | Efficiency-Optimized, Synchronous Flyback, High-Power PoE Controller/Converter | 2012年 1月 17日 | ||||
アプリケーション・ノート | High Efficiency Class 4 PoE Powered Device | 2011年 3月 23日 | ||||
アプリケーション・ノート | Advanced Adapter ORing Solutions using the TPS23753 (Rev. A) | 2009年 2月 9日 | ||||
アプリケーション・ノート | Designing an EMI Compliant PoE with Isolated Flyback | 2008年 5月 20日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
PMP8752 — マルチ出力、高効率フライバック・コンバータ、PoE アプリケーション用
TPS23785B は、PoE 受電側(PD)と PWM コントローラの両方の機能を内蔵しています。
PMP8407 — マルチ出力、高効率フライバック・コンバータ、PoE アプリケーション用
同期整流器を使用したフライバック・コンバータにより、IP 電話などの PoE アプリケーションに適した優れた効率性と小型サイズを実現しています。TPS23785B は、PoE 受電側(PD)と PWM コントローラの両方を内蔵しています。
パッケージ | ピン数 | ダウンロード |
---|---|---|
HTSSOP (PWP) | 24 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。