TAS2110
- Key Features
- 11V multi-level Class-H boost
- Integrated Look Ahead Algorithm with easy to use GUI
- Output Power (1% THD+N, VBAT=3.6V)
- 6.1-W into 4 Ω
- 5-W into 8 Ω
- Power Consumption(8Ω, VBAT=4.2V)
- 83.5% efficiency at 1W
- <1uA in hardware shutdown mode
- Power Supplies
- VBAT: 2.7 V to 5.5 V
- VDD: 1.65 V to 1.95 V
- Protections
- Battery: Advanced Brown Out
- Clipping: VBAT Tracking Peak Voltage Limiter
- Device: Thermal and Over Current Protection
- Interfaces and Control
- I2S/TDM: 8 Channels of 32 bit each up to 96 KSPS
- I2C: 4 selectable addresses
- 7.35 KSPS to 192 KSPS Sample Rates
- MCLK Free operation
The TAS2110 is a digital input Class-D audio amplifier with an algorithmically controlled, 11V Class-H boost in a QFN package. The look-ahead algorithms optimize boost voltage levels to match the output of the audio signal. This provides all the power needed for peak output while reducing the average power consumption significantly compared to constant output boosts. The algorithms are configured with PurePath Console GUI.
The Class-D audio amplifier is capable of delivering 6.1 W of peak power into a 4 Ω load at a battery voltage of 3.6 V. TAS2110 is 83.5% efficient at 1 W and consumes less than 1 uA in hardware shutdown mode.
TAS2110 helps protect against system shutdown with configurable brownout protection and VBAT tracking peak voltage limiter, both of which are configurable.
The TAS2110 QFN package is compatible with 2 layer board designs.
PurePath™ Console 3 や他の設計リソースへのアクセス権の申請方法:TAS2110 のご請求
技術資料
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
TAS2110EVM — TAS2110 11V Class-H 昇圧機能搭載、6.1W デジタル入力 Class-D オーディオ・アンプの評価基板
PUREPATHCONSOLE — オーディオ・システム設計 / 開発向け PurePath™ Console グラフィカル開発スイート
PurePath Console の直観的なグラフィカル・ユーザー・インターフェイス (GUI) (...)
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ | ピン数 | ダウンロード |
---|---|---|
VQFN-HR (RPP) | 32 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。