LMH6702QML-SP
- VS = ±5V, TA = 25°C, AV = +2V/V, RL = 100Ω, VOUT = 2VPP, Typical Unless Noted:
- Available with Radiation Ensurance
- High Dose Rate 300 krad(Si)
- ELDRS Free 300 krad(Si)
- −3dB Bandwidth (VOUT = 0.2 VPP) 720 MHz
- Low Noise 1.83nV/√Hz
- Fast Settling to 0.1% 13.4ns
- Fast Slew Rate 3100V/μs
- Supply Current 12.5mA
- Output Current 80mA
- Low Intermodulation Distortion (75MHz) −67dBc
- Improved Replacement for CLC409 and CLC449
All trademarks are the property of their respective owners.
The LMH6702 is a very wideband, DC coupled monolithic operational amplifier designed specifically for wide dynamic range systems requiring exceptional signal fidelity. Benefitting from TI's current feedback architecture, the LMH6702 offers unity gain stability at exceptional speed without need for external compensation.
With its 720MHz bandwidth (AV = 2V/V, VO = 2VPP), 10-bit distortion levels through 60MHz (RL = 100Ω), 1.83nV/√Hz input referred noise and 12.5mA supply current, the LMH6702 is the ideal driver or buffer for high-speed flash A/D and D/A converters.
Wide dynamic range systems such as radar and communication receivers, requiring a wideband amplifier offering exceptional signal purity, will find the LMH6702's low input referred noise and low harmonic and intermodulation distortion make it an attractive high speed solution.
The LMH6702 is constructed using TI's VIP10 complimentary bipolar process and TI's proven current feedback architecture.
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | LMH6702QML 1.7 GHz, Ultra Low Distortion, Wideband Op Amp データシート (Rev. E) | 2013年 3月 18日 | |||
* | SMD | LMH6702QML-SP SMD 5962-02546 | 2016年 6月 21日 | |||
* | 放射線と信頼性レポート | LMH6702xFQMLV ELDRS Report | 2012年 5月 14日 | |||
その他の技術資料 | TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. A) | 2023年 8月 31日 | ||||
アプリケーション・ノート | Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. A) | PDF | HTML | 2022年 11月 17日 | |||
アプリケーション・ノート | Single-Event Effects Confidence Interval Calculations (Rev. A) | PDF | HTML | 2022年 10月 19日 | |||
アプリケーション概要 | Analog Front-End Design With Texas Instruments’ Tooling Landscape | PDF | HTML | 2022年 3月 7日 | |||
セレクション・ガイド | TI Space Products (Rev. I) | 2022年 3月 3日 | ||||
e-Book(PDF) | The Signal - オペアンプ設計ブログ集 | 英語版 | 2018年 3月 23日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
ANALOG-ENGINEER-CALC — アナログ技術者向けカリキュレータ
VOLT-DIVIDER-CALC — Voltage divider calculation tool
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
TINA-TI — SPICE ベースのアナログ・シミュレーション・プログラム
TINA-TI をインストールするには、約 500MB が必要です。インストールは簡単です。必要に応じてアンインストールも可能です。(そのようなことはないと思いますが)
TINA は DesignSoft (...)
パッケージ | ピン数 | ダウンロード |
---|---|---|
CDIP (NAB) | 8 | オプションの表示 |
CFP (NAC) | 10 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点