TPS22920
- Input Voltage Range: 0.75 V to 3.6 V
- Integrated Load Switch
- Integrated Pass-FET rDSON = 2 mΩ (Typ) at 3.6 V
- Typical ON-Resistance
- rON = 5.3 mΩ at VIN = 3.6 V
- rON = 5.4 mΩ at VIN = 2.5 V
- rON = 5.5 mΩ at VIN = 1.8 V
- rON = 5.8 mΩ at VIN = 1.2 V
- rON = 6.1 mΩ at VIN = 1.05 V
- rON = 7.3 mΩ at VIN = 0.75 V
- CSP-8 Package 0.9 mm × 1.9 mm, 0.5 mm Pitch
- 4-A Maximum Continuous Switch Current
- Shutdown Current 5.5-µA Max
- ON-Logic Available in Both Active High/Low:
- TPS22920 is Active High
- TPS22920L is Active Low
- Low Threshold Control Input
- Controlled Slew-Rate to Avoid Inrush Current
- Quick Output Discharge Resistor
- ESD Performance Tested Per JESD 22
- 4000-V Human-Body Model
(A114-B, Class II) - 1000-V Charged-Device Model (C101)
- 4000-V Human-Body Model
The TPS22920x is a small, space-saving load switch with controlled turn on to reduce inrush current. The device contains a N-channel MOSFET that can operate over an input voltage range of 0.75 V to 3.6 V and switch currents up to 4 A. An integrated charge pump biases the NMOS switch in order to achieve a minimum switch ON resistance (rON). The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage control signals.
The TPS22920x has a 1250-Ω on-chip resistor for quick output discharge when the switch is turned off which insures that the output is not left floating.
The TPS22920x has an internally controlled rise time in order to reduce inrush current.
The TPS22920x is available in an ultra-small, space- saving 8-pin CSP package and is characterized for operation over the free-air temperature range of 40°C to 85°C.
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | TPS22920x 3.6-V, 4-A, 5.3-mΩ On-Resistance, Integrated Load Switch with Controlled Turn-on データシート (Rev. D) | PDF | HTML | 2016年 1月 19日 | ||
アプリケーション・ノート | Load Switch Thermal Considerations (Rev. A) | 2018年 10月 11日 | ||||
セレクション・ガイド | 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) | 英語版 (Rev.R) | 2018年 9月 13日 | |||
アプリケーション・ノート | Basics of Load Switches (Rev. A) | 2018年 9月 5日 | ||||
アプリケーション・ノート | Selecting a Load Switch to Replace a Discrete Solution | 2017年 4月 30日 | ||||
アプリケーション・ノート | Timing of Load Switches | 2017年 4月 27日 | ||||
アプリケーション・ノート | Managing Inrush Current (Rev. A) | 2015年 5月 28日 | ||||
EVM ユーザー ガイド (英語) | TPS22920EVM-002 User's Guide (Rev. A) | 2013年 8月 15日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
TPS22920EVM-002 — Evaluation Module for TPS22920 Ultra-Low rON, 4A Single Channel Load Switch with Controlled Turn On
TPS22920EVM-002 評価基板 (EVM) は、ターンオン制御機能搭載で r(ON) が非常に小さい 4A シングル・チャネル・ロード・スイッチである TPS22920 の評価を目的とする、包括的な組み立てとテスト実施済みの回路です。この評価基板を使用すると、さまざまな負荷条件 (最大 0.4A) の下で、TPS22920 にさまざまな入力電圧 (0.75V ~ 3.6V) を印加できます。この EVM で、出力、入力、スイッチングの各波形を監視できます。同様に、さまざまな入力コンデンサと出力コンデンサも評価できます。
TPS22920 TINA-TI Transient Reference Design
TPS22920 Unencrypted PSpice Transient Model Package (Rev. A)
TPS22920L Unencrypted PSpice Transient Model Package (Rev. A)
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
TIDA-01393 — TIDA-01393
The various versions of the TPS65086x PMIC allow this design to power devices from the basic ZU2CG device with a dual-core Arm® (...)
TIDA-01480 — Xilinx Zynq® UltraScale+™ ZU2CG−ZU5EV MPSoCs 向け統合型電源のリファレンス・デザイン
このデザインはスケーラブルであり、サポート対象は、デュアルコア Arm® Cortex®-A53 アプリケーション・プロセッサとデュアルコア ARM Cortex-R5 (...)
TIDA-00399 — SSD 電源供給リファレンス・デザイン
パッケージ | ピン数 | ダウンロード |
---|---|---|
DSBGA (YZP) | 8 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。